Scott Marine Surveyor Blog

Winter is A great Time to Get Educated!!

 So you bought that boat. You have been aboard others boats for years, and even helped, but this one is your own. What better way to hone your skills, stay safe, and make everyone’s experience with you better, than preparing for your time on the water now.

While winter white may not put you in the mood for watersports, winter is a great time to prepare for boating season by taking a boating safety course or a specialty skills course such as coastal piloting or how to use a GPS device. The U.S. Coast Guard recommends that all recreational boaters take a National Association of Boating Law Administrators–approved boating safety course. The basic NASBLA course provides rules and regulations, emergency procedures and the navigational skills necessary for a beginner. There are many options available to successfully complete a boating safety course, including the traditional classroom course, web-based instruction and a home study course offered in some states.

There are easily accessible classes available for new and experienced boaters alike — and education designed for boaters of every age. The U.S. Coast Guard Auxiliary, U.S. Power Squadrons and many state boating agencies sponsor classes.

For new boaters, basic courses generally have six to 13 lessons and provide a foundation of operational and safety instruction. That includes the boat and required equipment, trip planning, safe boat operations, emergency procedures, state-specific requirements and other water activities such as waterskiing, towed devices and wake sports.

Need help finding a class?

The U.S. Coast Guard website also provides more resources for Boating Safety Courses at uscgboating.org/safety/boating_safety_courses_.aspx.

Carving the Perfect Turkey    

Every year, countless families cringe as the annual carve the turkey debate rages on. So in the interest of harmony and Thanksgiving, here's what the pro's say.

Six steps to serving the perfect Thanksgiving bird

by Gerry Brown

Carving, and serving, the perfect turkey

Many beautiful Rockwellian Thanksgiving feasts have been spoiled when the golden brown turkey is hacked to pieces by an improperly trained carver. Whether you are looking to improve your technique, confirm that you are doing it right, or getting ready to pass the knife to Junior this year, here's a quick look at the proper way to look good slicing up and giving your family the bird.

What you'll need:

        a turkey;

        a good, long, sharp knife (an electric carving knife is nice but unnecessary and can often be more trouble than it's worth; if you're just starting out, go with an old fashioned manual model);

        a carving fork;

        an apron;

        a spot to place the meat as it's cut.

Step One

A Perfectly Cooked Turkey

Make sure the turkey is done! Sounds simple but several variables can conspire to throw off the pre-cooked time calculations. You want to make sure that you use a real meat thermometer, not one of those pop-up deals. Most times you'll end up with an overdone, dried out turkey and that's a nightmare for carvers. The meat will shred and crumble.

Assuming the turkey is stuffed, stick the tip of the thermometer into the stuffed cavity of the turkey. If the turkey is not stuffed, put the thermometer into the thigh pointing toward the body, but make sure it doesn't touch bone. If you are using an instant-read thermometer, don't leave it in while the turkey is roasting. The turkey is done when the thermometer says 160°F in the center of the stuffing or 180°F deep in the thigh; also, the turkey's juices should be clear, not reddish pink when thigh muscle is pierced deeply.

Step Two            

The turkey is done. Now take it out of the oven and let it "rest" for 20–30 minutes on the cutting board. Wash and dry your hands and put on your apron if you haven't already. Remove the stuffing from the bird and keep it warm. You are now ready to begin carving. The first thing you'll want to do is remove the leg on one side.

Some will tell you to steady the turkey with your big carving fork and use your knife to slice between the leg and the body of the turkey. Others will say to pull the leg gently away from the turkey while you cut with the other hand. Either way, you'll want to use the tip of the knife to probe the area just above thigh to find the joint that connects the leg to the turkey. That's the magic slice point.

Once you find the joint, cut it firmly but smoothly. Usually it will cut through with relative ease but if not, check to make sure you are not trying to cut through bone. Once you get the leg off the bone you can cut some meat off the leg. But first separate the thigh from the drumstick by cutting through the joint that connects them. The thigh is simple to carve—just slice the meat parallel to the bone.

A lot of people just leave the drumsticks intact because that's the way the kids like them. But if you want to carve them, here's how: hold the drumstick by the small end and rest the big end on the cutting board and slice downward. Don't try to get slices that are too thin. Go for medium-sized pieces.

Step Three

 Before you attempt to carve the breast you need to cut off the wings. Do this in the same way you did the legs. Find the joint near the turkey's body and cut through the magic slice point.

Step Four

Carving A Perfectly Cooked Turkey

Now, this is one of the most crucial and controversial steps. There are two general schools of thought on the best way to carve the breast. Most people like the white breast meat, so this is the step that makes or breaks your carving reputation.

There is the traditional method, in which one cuts the breast one slice at a time away from the bird. Another method, sometimes called the "kitchen method" because it is usually done out of view of the guests, involved cutting the entire breast away from the bird and then slicing it into pieces.

The traditional method is a little easier and by far the most popular. In the kitchen method you may be able to regulate the thickness of each individual slice a little better, but it should be done by only those who have mastered the traditional method first.

If you're sticking with the traditional method, steady the turkey with your fork and slowly and smoothly carve the turkey breast in downward-slanting slices. Start with a small slice, roughly the diameter of a soda can, and as you cut, the slices will get larger. As you are cutting periodically check to make sure that the slices are even and not thicker on one end or the other. As they come off the bird, stack the slices as neatly as possible on a serving platter. Sliced meat cools fast so serve it quickly or have some piping hot gravy on standby if things cool off.

Step Five

 Repeat step four on the other side of the bird.

Step Six

 Serve it up, say grace, and dig in with the satisfaction of knowing that you are the best carver at the table.

Get A Survey

It's easy to fall in love with an appealing sheer line, shimmering gelcoat, and gleaming teak, but DON’T let your heart guide you; you need an objective marine survey to avoid buying with rose-colored sunglasses on.

A marine survey is an independent evaluation of a boat's condition and value, performed by a qualified inspector who has no stake in the outcome. In fact, even experienced surveyors will usually hire a fellow professional to do the survey on a boat they're considering, to keep emotion out of the equation. Many boats sit unused and get minimal maintenance. When these boats begin to be sold, a professional evaluation, devoid of the excitement of boat-buying, is even more critical. Here's what a good survey provides:

• The condition of the boat and its equipment: A marine survey gives a snapshot of the condition of the boat's visible components and accessible structures at the time of the inspection. A survey provides a list of deficiencies as well as needed repairs and focuses on safety. Deficiencies in a survey can be used to renegotiate the sales price or scrap the deal altogether if needed repairs are too expensive or complicated.
• The value of the boat: Surveyors use pricing guides along with their vast experience in valuing boats. A seller or broker may think a boat has a specific worth, but until a survey is performed, those figures are only guesses. Banks and insurance companies use the survey value to determine loan and insurance hull value amounts. This is also a great tool for price negotiations and can easily pay for the cost of the survey.
• A budget for repairs and maintenance: Nearly any boat will have some defects and deficiencies; knowing what they are beforehand makes it easier to know how much to budget for the future. Surveys typically provide a list of recommended, prioritized repairs. The most important ones are critical to safety and usually your insurance company will require them to be completed. The rest are things that can be done as you find time and money.

Veterans Day is intended to honor and thank all military personnel who served the United States in all wars, particularly living veterans. It is marked by parades and church services and in many places the American flag is hung at half-mast. A period of silence lasting two minutes may be held at 11am. Some schools are closed on Veterans Day, while others do not close, but choose to mark the occasion with special assemblies or other activities.

Veterans Day annually falls on November 11. On the 11th hour of the 11th day of the 11th month of 1918 an armistice between Germany and the Allied nations came into effect. On November 11, 1919, Armistice Day was commemorated for the first time. In 1919, President Wilson proclaimed the day should be "filled with solemn pride in the heroism of those who died in the country’s service and with gratitude for the victory".

Veterans are thanked for their services to the United States on Veterans Day.

Sometimes, i get asked about the craziest things.

Exhaust stains can turn a white transom gray and make an otherwise clean boat look dirty. As you probably already know, exhaust stains don't always come off in the wash. Some spray cleaners are strong enough to remove exhaust stains; however, if they're strong enough for that job, then they're probably also strong enough to eventually strip that area of wax, only making it harder to clean the exhaust stains off over time. The best way to remove exhaust stains from gelcoat is to wax them off. This is something that can easily be done by hand with cleaner wax. Use a terrycloth rag to apply the wax, and wipe or rub it in until the exhaust stains are gone. Then use a microfiber rag to wipe the hazy wax residue off. If the exhaust stains cover a large area, you'll want to use several terrycloth rags as you go, so you're not rubbing the exhaust soot from the rag back onto another section of your boat. When you're finished, you'll be left with a clean, white surface, and it should be a little easier to wipe exhaust stains off next time because they'll be sitting on top of freshly waxed gelcoat.

De-icer can help Protect Your Boat and Dock this Winter

Okay boys and girls, the northeast generally isn’t to kind to boaters who decide to keep their boats in the water all winter. Yet, many of you say that with de-icer, you can survive. It can help, but only in some instances.  I don’t recommend keeping it in the water, but if you do:

Here are three winter disasters a de-icer can help prevent:

1. Hull Damage

Normal current and wind speeds naturally make water rigs tip, rock and pitch in the water. When freezing temperatures and a layer of ice are added to the equation, the result is a nasty grinding action that can scratch and tear away the gel-coat along the waterline of fiberglass boats. This allows water to sneak into the laminate and further damage the hull. Ice can also get into the plank seams or the bilge of a wooden boat and cause anything from minor cosmetic damage to major leaks.

2. Dock Lifting

Ice, wind and current are no friend to docks, either, especially if all three elements are thrown together. Because ice expands during the freezing process, the water levels will fluctuate, making it difficult for dock piles to stay firmly in place. Heavy ice flows and ice pressure can shift the dock pilings – or worse, pull them out of their footings entirely. Any watercraft near the dock could be damaged as the dock shifts.

3. Ice Expansion

Like most substances, water at ordinary temperatures contracts, increasing in density as it cools. At about 4 degrees Celsius, however, water reaches its maximum density and then decreases in density as it reaches its freezing point. Because of this, ice forms on the top of the water first, allowing it to freeze and float, and then the rest of the ice forms below. This simple sequence can be disastrous for both docks and boat hulls. The pressure from ice expansion can crush a hull or dock, causing major damage and compromising the structural integrity of the craft.

Old Man Winter can try as he may to freeze lakes and rivers, penetrate boat hulls and crush docks – but he’ll have a much harder time succeeding if a de-icer is on hand to protect your goods during the winter.

How To Make Your Fiberglass Gleam

Now's the perfect time to get that lustre back. Roll up your sleeves and get ready to work, but the reward is well worth it.

Here's an article by Lenny Rudow with step by step instructions.

Seal out the oncoming winter with rubbing, buffing, waxing, and polishing, but don't forget the elbow grease.

Keeping gelcoat properly maintained isn't just a matter of vanity, it's also a matter of protecting your boat's fiberglass. Now that we have that out of the way, let's get real — you do want to dazzle your slip neighbors with the mirror-like hull sides on Mom's Mink, don't you? You're far more likely to be able to raise a good shine come spring if you remove the season's stains now and protect the fiberglass from the ravages of winter with a couple of good coats of wax. Luckily, keeping your boat in tip-top shape is a lot easier than it was in the old days when wooden vessels called for scraping, sanding, and painting for hours on end. But don't get too smug. There's still a lot of work in your future, so let's get started.

Step 1: Remove Oxidation

For the purposes of this article, we'll assume you're starting with gelcoat that's slightly oxidized. If it's extremely oxidized, you may need to call in a pro. If your gelcoat doesn't show any signs of oxidation (yellowing and/or a chalky, dull appearance), skip to Step 2. Oxidation occurs naturally, as exposure to sun and weather break down the gelcoat's surface and turn it chalky and pitted. If your boat is more than a couple of years old and hasn't been meticulously maintained, chances are there's some level of oxidation. The more there is, the tougher this step will be.

You need to hit every inch of the fiberglass with a good oxidation remover. As a rule of thumb, it's best to use the least abrasive oxidation remover possible, so you don't grind away lots of gelcoat. How will you pick which one is right? Test a few different products on a small section of the gelcoat to find the least abrasive product that still gets the job done. If you try to deoxidize the entire boat by hand, you'll blow out your elbows; an orbital buffer is a must-have tool for this task.

Fit the buffer with a terry cloth bonnet, and pour a big "X" onto it with the oxidation remover. Then hold the buffer gently against the hull side with even pressure, and hit the power button.

WARNING: If you hit the power button before the buffer is sitting flat against the hull, it'll spray oxidation remover in every direction.

Once the buffer is running, sweep it back and forth across the hull, going over the same area three or four times and being sure not to leave any gaps in your coverage. Never hold the buffer still, or it can "burn" a divot in the gelcoat.

You've hit the entire hull? Now look carefully for spots the buffer missed because there are always a few (under the rub rail, transom corners, and around thru-hull fittings, for example) and do them by hand. Then put a new bonnet on the buffer, and use it to rub off the oxidation remover. If the oxidation was severe, or if the remover you chose was too weak, you may have to repeat this step.

Step 2: Eliminate Stains

Once the oxidation is gone, there's a good chance you'll see a few stains. Let's get rid of them. Most can be attacked with rubbing compound and a rag, but toughies like rust streaks will require the use of an acid-based cleaner. These are often marked "fiberglass stain remover," but read the active ingredients to be sure some sort of acid is listed. Also be sure to limit their usage to where they're absolutely necessary, and follow the instructions on the bottle; these cleaners can give off harmful fumes, burn your skin, and damage the gelcoat if you don't thoroughly rinse them away after use. Be careful that you don't rinse them into the water.

Step 3: Bring Out The Shine

Now we can polish the hull sides into tip-top shape. There are many good polishing products from which to choose, but this is not the time to opt for a combination polish/wax. That stuff is great for midseason touch-ups, but not for sealing out winter weather. Go for a dedicated polish such as Starbrite Premium Marine Polish. Apply the polish as you applied the oxidation remover, sweeping the buffer back and forth across the fiberglass until the entire boat has been covered. Let it dry, and then remove it. Whew! You've probably worked up a sweat by now, but we're just getting started; you need to do the entire boat a second time, because one of the keys to making a boat shine like the sun is to polish it twice.

Step 4: Seal In The Shine

We'll bet the glare coming off Mom's Mink is downright blinding right about now, but if you stop working, the gelcoat's finish will go back to being dull in a matter of days. You need to seal that shine in, and wax is the key ingredient. For this step, choose a paste wax that's based on bee's wax, NOT carnauba wax, which does create a better shine but also wears away faster. Again, you need to give the boat two thorough coatings of the paste wax, and unfortunately, this stuff gets applied by hand. Now for the coup de grâce: a coating of that shiny carnauba stuff. Apply it lightly and gently, so you don't rub away any of the paste wax. Then clean it off with a final pass of the microfiber buffer bonnet.

That was a lot of work, but a lot less than scraping, sanding, and painting. In the spring, you should be able to get away with a quick polish and then sealing in the shine. You can keep your boat looking red-hot all summer by washing it down with a wash-n-wax boat soap that contains a dose of carnauba. If you're a perfectionist, renew the shine by giving the gelcoat another carnauba wax job every other week. And don't look directly at your boat's gelcoat without wearing sunglasses, or you might burn out a retina. If not, then it's time to (sigh) go back to Step 1

Is it for you?

There are many benefits in using a dry rack storage facility:

It’s especially popular in warm weather locales. However, its available everywhere. Here’s an excerpt of an article that appeared in Boat US a while back covering the pluses and some drawbacks.

First, ease of use. You call ahead to have your boat brought down and even fueled. Then you arrive, hop in, and go. When the day is over, you return to the marina, dock the boat in the designated area, and leave. The marina washes it down and puts it back up on the rack.

Second, it may save money. Since you don't have a trailer, you're not spending money on gas, launch fees, or upkeep on the trailer. Also, because your boat isn't sitting in the water, you won't have to clean off the marine growth or bottom paint the hull every year.

Third, it keeps your boat in better shape. If your boat is sitting in a big steel barn and not constantly being bombarded by the sun's UV rays, you are lessening the possibility of gelcoat damage. However, keep in mind that if your boat is in a three-sided shed or a rack with just a roof, some sunlight might get on your boat.

Fourth, it's good protection for your boat. Most buildings have security measures like electronic security systems to stop vandalism and outright boat theft. Many of the newer buildings have fire suppression systems from sprinklers and even synthetic fire retardant foam systems. Also, many buildings in hurricane-prone zones have been built according to local hurricane codes. If you keep your boat in a hurricane-prone area, check to see what kind of protection the rack facility offers.

Fifth, it provides alternatives to keeping a boat and trailer sitting in the driveway. Due to homeowner association by-laws or city ordinances, some small boat owners can't keep their boats in their driveways. In addition, dry stack storage is good for owners who find themselves being kicked out of marinas to make room for larger yachts.

Last, it may be environmentally better in some circumstances. According to Delaware State Parks' Indian River Marina, dry stack storage "Minimizes need for dredging, minimizes water quality and flushing concerns, and reduces the amount of contact time between pesticide-containing bottom paints and the water."

Of course, as with everything, there are some downsides. Most places only allow you one launch and retrieval per day. That launch time can get long if the dry stack is extremely busy that day. Also there usually isn't any place at the facility to park your boat in the water and use it overnight. Also, you can't just show up at the facility and tinker around on your boat. Most dry stacks don't allow boat owners to work on their boats in the facility.